Design & Files
Updated 2026-01-08
This guide helps you prepare files and images in your current project to achieve more stable engraving results. Follow the steps—no technical background required.
Supported File Formats
- Images (for engraving): JPG, PNG, BMP
- Vector graphics (for scribing/contours): SVG
- 3D models (for relief/3D machining): STL
Recommendations
- Choose clear, high-contrast images with a prominent subject and crisp edges.
- Keep file size moderate; avoid overly large or tiny files that affect preview/import.
- If you change material or design style, re-preview to confirm the result.
How to Improve Poor Image Quality for Engraving
Source Control
- Use clear originals: even lighting, distinct subject, simple background.
- Avoid overly compressed images or images with heavy noise.
Simplify and Emphasize
- Crop to retain key areas; remove unnecessary complex backgrounds.
- Increase overall contrast moderately to make edges clearer and levels more distinct.
Preview and Small Tests
- Preview in the software to inspect details and edge rendering.
- Run a small-area test; proceed to full engraving after confirming results.
How to Prepare Photos for Laser Engraving
Choose Suitable Photos
- Clear subject and clean background; avoid clutter and strong reflections.
- For portraits, choose soft lighting with clear facial details.
Simplicity and Contrast
- Crop and simplify to highlight the subject and reduce irrelevant elements.
- Increase overall contrast and tonal separation so outlines are easier to recognize.
Confirm the Result
- Preview edges and shadow rendering in the software to ensure details are visible.
- If results are not ideal, replace the photo or adjust the composition until satisfied.
How to Generate Relief (STL) from Images
Image Preparation
- Choose images with clear levels and strong contrast; keep the subject clear and edges clean.
Generate and Review
- Use the entry
in the software to generate the effect and review the preview. - Check whether height transitions are natural and edges are smooth; replace the image if necessary.
Start Engraving
- Once satisfied, generate toolpaths and start engraving.
- Submit your issue through the feedback portal in the user center. Include your operating system and browser, device model, connection method, and any prompts shown when the issue occurred.